How To Repair Mercury Inverter F5 Error Easily
This article will show you how to repair Mercury Inverter F5 error easily. Â Please note that all Mercury Inverters come with a one year warranty and breaking the seal makes the warranty void.
F5 Error
When the inverter is switched on, it only comes on for a few seconds then starts beeping with F5 on the LCD display. Â This is usually an indicator of a blocked fan.
Solution
Cleaning or replacing the fan should resolve the issue
pls where can i repair my mercury inverter around Lagos
5a Iyalla street Alahusa Ikeja behind Shoprite, call us on 07037451701
Please, where and how can I get replacement for the faulty fan?
please contact us on o7037451701
Hi,
Please indicate or advise to what should done when a 2.4kva mercury inverter suddenly start to “On and Off” itself in less than few seconds at interval thru out the day. Urgent reply needed pls. Thanks
Good sir/ma, the inverter is faulty and it need to be repaired, contact us on 07037451701
My mercury 2.4kva was showing f5 and after replacing the fan it worked for some minutes and stopped again.
Inverter not charging again but still supply light
it has to be repaired, contact 07037451701
Changing the fan didnt help… Its still doing the same thing.
Hi Sir,
What was the name on the fan, and from where did you buy it? If the wrong type of fan is used it will not work.
It’s only coming on charge a bit and goes off why?
Why does elite 650 pro mercury ups not producing output?I have changed all the relay still it doesn’t produce, please help me out.
it faulty and it need to be checked, contact 07037451701
Pls help! Where and how can I get the fan? The compatible one
from us, contact 07037451701.
Can I become a retailer or distributor? What dose it take
send your details to support@mercurydirect.com.ng
Good morning sir I just got my mecury ivaerters 2.4 last year but I started using it by January this year but resently start giving me F5 ones it on after some miniets Please what can I do
Good day sir, if it is still under warranty as you said, you can contact the service number for repair at no cost.
My inverter batteries that normally lasts hours now stay foe just about 10 minutes. I have used it for about four years now. Has it expired?
They are not strong any longer, it means you have to change the batteries
Good day my mercury inverter beeps on f5 mode what should I do?
Hello Sir, The f5 code means the fan is bad. if your inverter is under warranty, please contact your point of sale for repair at no cost.
if out of warranty you can call us on 07037451701
How to repair error 3 pls
Good day sir/ma, the f3 is to return to the point of sale
My new Mercury 1.6kva inverter beeps without any error code even with fully charged battery. What might be the cause? The fan comes on and after blowing for sometimes, it goes off? Is that a normal operation?
Please, check the back of the inverter. put back the switch to normal mode.
What if in a situation whereby the fan is working, can it still be the cause if the error code f5?
Good day sir, Yes the f5 code simply means the fan is bad.
I have a mercury direct,but giving me a problem showing me f5 pls how can I replace it or repaired
Ok, sir, you can send it to our office address for repair 5a, Iyalla street Alausa Ikeja, Lagos.
Behind Ikeja Shoprite, The cost of repair is #15,000.
What’s fault code f2
My mercury 2.4kva was showing f5 and after replacing the fan it worked for some minutes and stopped again.
Please what can I do my 2.4 kva plug always have current in both plug pin even if it was not plug and if it is plug and there is no electricity supply it will supply little current into the wire.
What can I do?
I have changed the fan and it works fine. Thank u so much
You’re Welcome.
My Mercury 5kva inverter
Just stopped suppling power and the lcd back is on but doesn’t display and information. The fan comes on and that is it . Please what could be the issue .
That is a wrong connection in the house. Please, contact the point of sale for support.
My inverter will on for five seconds and say f5 fault, what can I do sir
Please, bring it to us to the following address – 5a sunday adigun street, alausa ikeja. behind shoprite.
Good afternoon sir, my 2.4va Mercury inverter is saying f5 error fault. How do I fix it sir. Thanks
Please, bring it to us to the following address – 5a sunday adigun street, alausa ikeja. behind shoprite.
Hello, I recently installed my mecury inverter 2400, then I power it on, not coming up, but when I plugged it into power, it’s beeps and show F4 fault. Please what’s the possible solution? It’s a new inverter with new 12v 100ah battery.
Your mercury 2.4kva inverter requires 2x 12v batteries.
Please, contact the point of sales for the fault.
My ups 6kva when switched on … It will beep red light… Showing error 26 .. without giving output… But when switch to bypass it will give output… Please what’s will I do?
Good day please my mercury12v inverter displays f0 when powered on please need help
Please, contact the point of sale.
My new Mercury 1.6kva inverter beeps without any error code even with fully charged battery. What might be the cause? The fan comes on and after blowing for sometimes, it goes off? Is that a normal operation?
Hi
My Inverter shows an F4 error code and wouldn’t charge my batteries.
Do you have any repairers around Isolo, Lagos
Hi
An F4 error code on my Inverter and the batteries wouldn’t charge
Do you have any repairers around Isolo, Lagos
Hi, I got my inverter March Last year, by July this year there was a heavy rainfall which affected it but we changed the inverter to a new one , the problem is the battery doesn’t last, some days four hours for the past two days it work for two hours, this is something that usually work for 12 hours. Now we don’t even put on anything apart from socket for charging phones.
Our 10kva mercury ups not inverting, if you press the on button down it Invert but no out put, then a continuous beeping sound, with the fault red light on and no fault words or number showing on it monitor screen.
F5 issue. The fan on my inverter does not come on.
Your phone number is switched off.
Hello Admin,
Please, how can I resolve error code f2 on my mercury inverter
My ups 6kva when switched on … It will beep red light… Showing error 26 .. without giving output… But when switch to bypass it will give output… Please what’s will I do?
My Mercury 2.4kva 24v will not charge batteries again and when You switch off,it will display F4 before going off
Our 10kva mercury ups not inverting, if you press the on button down it Invert but no out put, then a continuous beeping sound, with the fault red light on and no fault words or number showing on it monitor screen.
For the F5 error code, it’s not necessarily mean that the fan is bad but it also indicates as the malfunction of the inverter card.
In my opinion, I will say that this particular mercury inverter is not a good system because I have seen many times were people have this same issue and it turnout to be nothing wrong with the fan instead the microprocessor that is controlling the system that is faulty.